Electronic Sounder

The Electronic Sounder DP100 covering an area of approximately 100m. Its ABS injected structure is immune to corrosion, and the connection can be made directly into a socket, using a bell switch, or the Signaling System DPSIN.

The DP100 Phone version comes with a device for automatically activating your beep through a telephone line or extension. It is recommended for locations where noise levels require amplification of the phone sound through the DP100 Phone.

Technical specifications of DP100

  • It covers an area of approximately 100m.
  • Up to 95dB @ 1m.
  • Dual Voltage: 110 / 230V AC.
  • Frequency: 50/60 Hz.
  • Operating Temp: 0ºC to +50ºC.
  • Material: ABS Dark Grey Finish.
  • Measures (mm): 135 x 80 x 62.
  • Net weight: 290g.
  • Rated for intermittent use: 15 minutes on / 10 minutes off.
  • Max. continuos use time: 1 minute.
  • Factory warranty: 1 year.
  • PHONE version included: connection device, telephone wire and installation manual.
  • It allows the parallel connection of 10 units in the Signaling System DPSIN.

Check the operation of DP100

Signaling DIPONTO


Know the whole line of sound and visual signaling.

Supplies DIPONTO


Know the supplies line to automated time clocks and time recorders.